Skip to main content

Stenciled Christmas Cards

I've been busy finishing my Christmas cards.

I found this "JOY" stencil in my craft stash a few weeks ago and decided to design my card using it. I haven't stenciled anything in several years so I thought I would revive the craft this year. I forgot how much I like to stencil.

I put on Christmas music, hubby built a fire in the fireplace, and I stenciled at the dining table where I had plenty of room to spread out. As you can see, I stenciled silver paint on a piece of dark blue art paper (bought at Michael's for @ $2.00).





After stenciling 2 whole sheets, I cut around the stenciled design to fit on the front of my card stock. I also cut down 8 1/2 x 11 sheets of card stock in half to make my card base.

I buy my card stock in reams to cut down on the cost. One ream lasts me several years. In addition, I cut down a roll of bulletin board paper (from the teacher store) to fit just inside the front of my cards (5 x 3 1/2 inches).

I also used glue sticks, dark blue ink pad, and two rubber stamps.


First, I glued the silver bulletin board paper to the front of the folded card stock.


Then, I topped it with my stenciled "JOY".


Inside the card, I stamped a Bible verse and a graphic.




Then, I flipped the card over and stamped my "Handmade by" stamp and signed my name. Sometimes I add the date too. (ignore the aged hand in the picture!)



Well, that's how I make my simple Christmas cards. I usually make @70 cards every year. I like making something handmade for the people I love.



Comments

  1. And I think I'm doing a great job just to get mine ordered by the beginning of December!

    ReplyDelete
  2. Those are gorgeous!! What a beautiful design. Well done.

    ReplyDelete

Post a Comment

I'd love to know what you're thinking. Please feel free to leave ideas and comments.

Popular posts from this blog

How To Make Your Own Exercise Bike For Next To Nothing

Remember back in April when I had a kidney transplant?  Well, the kidney is doing great (thanks, Cathy , for taking such good care of it when you owned it).  There was one little glitch, however.  During surgery, the retractors they used caused some nerve damage in my right leg.  When I woke up from surgery, I couldn't move or feel my leg.  The docs felt like the feeling would come back but the paralysis had them stumped.  A visit to a neurologist ruled out a stroke and a CT scan showed some fluid which was pressing on L4 and L5 (medical talk which means I couldn't feel or move part of my leg).  The prognosis is good and I'm recovering pretty quickly.  In fact, I've left my cane behind and I'm walking freestyle without falling.  My next goal is to be able to drive. I've been itching to get back to exercising (physical therapy doesn't count) because my medication causes me to gain weight and I need to burn some calories.  Running? - nope.  Walking? - can&

A Designer's Secret For A Taller Bed

  Several years ago Hubs and I spent almost a year looking for a bedroom set that we both loved.  He wanted clean lines and dark wood.  I wanted curves and a "tall" bed.  Of course, there was no perfect bedroom set but we were able to compromise on a set that we both liked.  My main wish was for a bed that I could "climb up into".  The problem with that wish was that most of the "tall" beds were four poster beds and Hubs was not in the mood for that.  We found a Thomasville bed on display at a local furniture store and it fit the clean lines that Hubs wanted and it was "tall"  enough to suit me.  The problem was that once we received the bed we ordered in our home, it wasn't as tall as I had remembered it being.  My heart sunk!  I went back to the furniture store to look at the display.  Their bed was much taller than our bed.  Hmmm. . . what was different? I got nosey and lifted up the comforter on the bed.  It revealed their secret

Plans For A DIY Exercise Bike Stand

  Thank you to so many of you who emailed me about plans for the DIY Exercise Bike Stand .  I apologize that it has taken me so long to get the measurements to you, but they are finally here!   The wood was purchased at Home Depot and the bike pegs were purchased at Walmart in the bike section.    The bike we used for this project is a 24" 12 speed bike (I'm a shorty).  I used the hardest gear while riding, but this set-up does not allow you to really get much resistance (for building muscle).  It was great for getting my legs moving after some nerve damage.  I also wanted to burn calories and get my heart rate up and this did the trick.    If you have any questions, just shoot me an email.