Skip to main content

Laundry Soap never looked so good

A few weeks ago I picked up this little ceramic canister at a Habitat For Humanity Restore.

After I got it home I realized that it didn't seal well enough to store food.

No worries, though, it can hold laundry soap!


I was able to use some hand-me-down stickers my mother-in-law gave me.

I used letter stickers to label the front and laundry stickers on the back.  I used a permanent marker to make the clothes line and clothespins.  The marker won't rub off but it will come off if you use a Mr. Clean Magic Sponge (I had to erase a boo-boo I made).


I filled the container with my homemade laundry soap.  This batch turned out a bit too chunky because I experimented with Ivory soap instead of my usual Fels Naptha.  It still works but I have to help the soap dissolve in the water before I add the clothes.

*note to self:  don't use Ivory soap!

So for $2.00 (the cost of the canister) I have a cute addition to my laundry room.

Comments

  1. I LOVE your laundry soap container, and the decorations on it look so cute! We make homemade laundry soap now since you introduced it to us. We keep it in a plastic container, but now I will be on a lookout for one like yours. I was jealous of your composting under the sink and now your laundry room! Ha! Have a good week!
    Lottie

    ReplyDelete
  2. What an adorable container! My homemade laundry soap calls for grated castille soap, borax, washing soda and baking soda. I was using Dr. Bronner's Baby Mild as my grated soap, but then I discovered that it works just as well without the grated bar soap. The clothes are so fresh without being 'perfume-y'. But, alas, mine is stored in an old pretzel container from BJ's. *sigh*

    ReplyDelete
  3. Was that the Habitat store at Kempsville and Providence??? Or is there one in Chesapeake???

    ReplyDelete
  4. We went across the water to Hampton. I think it was on Warwick Blvd. in the older neighborhood.

    ReplyDelete

Post a Comment

I'd love to know what you're thinking. Please feel free to leave ideas and comments.

Popular posts from this blog

How To Make Your Own Exercise Bike For Next To Nothing

Remember back in April when I had a kidney transplant?  Well, the kidney is doing great (thanks, Cathy , for taking such good care of it when you owned it).  There was one little glitch, however.  During surgery, the retractors they used caused some nerve damage in my right leg.  When I woke up from surgery, I couldn't move or feel my leg.  The docs felt like the feeling would come back but the paralysis had them stumped.  A visit to a neurologist ruled out a stroke and a CT scan showed some fluid which was pressing on L4 and L5 (medical talk which means I couldn't feel or move part of my leg).  The prognosis is good and I'm recovering pretty quickly.  In fact, I've left my cane behind and I'm walking freestyle without falling.  My next goal is to be able to drive. I've been itching to get back to exercising (physical therapy doesn't count) because my medication causes me to gain weight and I need to burn some calories.  Running? - nope.  Walking? - can&

A Designer's Secret For A Taller Bed

  Several years ago Hubs and I spent almost a year looking for a bedroom set that we both loved.  He wanted clean lines and dark wood.  I wanted curves and a "tall" bed.  Of course, there was no perfect bedroom set but we were able to compromise on a set that we both liked.  My main wish was for a bed that I could "climb up into".  The problem with that wish was that most of the "tall" beds were four poster beds and Hubs was not in the mood for that.  We found a Thomasville bed on display at a local furniture store and it fit the clean lines that Hubs wanted and it was "tall"  enough to suit me.  The problem was that once we received the bed we ordered in our home, it wasn't as tall as I had remembered it being.  My heart sunk!  I went back to the furniture store to look at the display.  Their bed was much taller than our bed.  Hmmm. . . what was different? I got nosey and lifted up the comforter on the bed.  It revealed their secret

Plans For A DIY Exercise Bike Stand

  Thank you to so many of you who emailed me about plans for the DIY Exercise Bike Stand .  I apologize that it has taken me so long to get the measurements to you, but they are finally here!   The wood was purchased at Home Depot and the bike pegs were purchased at Walmart in the bike section.    The bike we used for this project is a 24" 12 speed bike (I'm a shorty).  I used the hardest gear while riding, but this set-up does not allow you to really get much resistance (for building muscle).  It was great for getting my legs moving after some nerve damage.  I also wanted to burn calories and get my heart rate up and this did the trick.    If you have any questions, just shoot me an email.