Skip to main content

How To Cook Your Halloween Pumpkin

So, you've carefully cut out 2 eyes, a nose, and a mouth.  Your jack-o-lantern is looking pretty cute - that is until the next day when it starts to rot onto your front steps. 

I always hate to throw out a perfectly good pumpkin - even if it's just into the compost pile.

Several years back I came up with a solution. 

As you can see, my little preschool class is pretty good at making jack-o-lanterns.



After we carved our little snaggle-toothed friend, I toted him home to cook him and eat him (Ewww...)


First, I cut it in half.


Then, I cut each half into even portions.

  If you make your jack-o-lantern to hold a candle, you'll have already scooped out the goop and seeds.  If any goop is left after cutting it open just scrape across the surface with a knife and it will come clean.  Hang onto your seeds.  I'll explain how to roast them later.


Place all of your pieces onto baking sheets with sides.  This is very important because as the pumpkin cooks it will create liquid and you don't want it to leak into your oven. 

Cover with foil and bake in a 350 degree oven for 1 to 1 1/2 hours.  Every pumpkin is different, so check on it after an hour to see when it is done.  You want to be able to smoosh it with a fork.
Posted by Picasa

Not all pumpkin will be orange when it is done.  This particular one is a dark yellow.



Let it cool completely.  I let mine cool overnight and it did fine.  Then, carefully slide a knife between the soft pulp and the rind.  The pulp will come off easily.  If you want to get every little bit you can scrape a large spatula across the rind and more will come off.



Toss the pulp into a blender or food processor.  Blend until no chunks remain.  If you cooked it thoroughly, it will only take 5 seconds.



Measure out your pulp into 2 cup or 1 cup portions, depending on what kind of recipes you'll be using.



I freeze my pumpkin pulp in 2 cup measurements in ziploc bags.


My pumpkin made 10 cups of pulp (5 bags).  I used one bag to make a yummy pumpkin cake.  Jo-Lynne provided a great healthy recipe.


While the pumpkin is cooking, I carefully wash my seeds in a colander.  I discard the strings and extra pulp.

Then I place the seeds in a baking dish (I like my stoneware), drizzle with EVOO and a pinch of salt.  I let the pan sit on the stove until the pumpkin pulp is cooked.  When I pull out the pumpkin, I pop in the seeds.  Let them roast at 350 degrees for 20 minutes or until they are brown. 


We like these as a yummy snack.


Comments

  1. I think I will be doing this this year. :] Can you use the pulp to make pumpkin pie? I'm new to all of this stuff, can you tell?

    ReplyDelete
  2. Yes, Tiffany, you can use the pumpkin puree just like you would use a can of pumpkin (but it's not the same as "pumpkin pie filling"). I'll email you a pumpkin pie recipe that will work.

    ReplyDelete

Post a Comment

I'd love to know what you're thinking. Please feel free to leave ideas and comments.

Popular posts from this blog

How To Make Your Own Exercise Bike For Next To Nothing

Remember back in April when I had a kidney transplant?  Well, the kidney is doing great (thanks, Cathy , for taking such good care of it when you owned it).  There was one little glitch, however.  During surgery, the retractors they used caused some nerve damage in my right leg.  When I woke up from surgery, I couldn't move or feel my leg.  The docs felt like the feeling would come back but the paralysis had them stumped.  A visit to a neurologist ruled out a stroke and a CT scan showed some fluid which was pressing on L4 and L5 (medical talk which means I couldn't feel or move part of my leg).  The prognosis is good and I'm recovering pretty quickly.  In fact, I've left my cane behind and I'm walking freestyle without falling.  My next goal is to be able to drive. I've been itching to get back to exercising (physical therapy doesn't count) because my medication causes me to gain weight and I need to burn some calories.  Running? - nope.  Walking? - can&

A Designer's Secret For A Taller Bed

  Several years ago Hubs and I spent almost a year looking for a bedroom set that we both loved.  He wanted clean lines and dark wood.  I wanted curves and a "tall" bed.  Of course, there was no perfect bedroom set but we were able to compromise on a set that we both liked.  My main wish was for a bed that I could "climb up into".  The problem with that wish was that most of the "tall" beds were four poster beds and Hubs was not in the mood for that.  We found a Thomasville bed on display at a local furniture store and it fit the clean lines that Hubs wanted and it was "tall"  enough to suit me.  The problem was that once we received the bed we ordered in our home, it wasn't as tall as I had remembered it being.  My heart sunk!  I went back to the furniture store to look at the display.  Their bed was much taller than our bed.  Hmmm. . . what was different? I got nosey and lifted up the comforter on the bed.  It revealed their secret

Plans For A DIY Exercise Bike Stand

  Thank you to so many of you who emailed me about plans for the DIY Exercise Bike Stand .  I apologize that it has taken me so long to get the measurements to you, but they are finally here!   The wood was purchased at Home Depot and the bike pegs were purchased at Walmart in the bike section.    The bike we used for this project is a 24" 12 speed bike (I'm a shorty).  I used the hardest gear while riding, but this set-up does not allow you to really get much resistance (for building muscle).  It was great for getting my legs moving after some nerve damage.  I also wanted to burn calories and get my heart rate up and this did the trick.    If you have any questions, just shoot me an email.