Skip to main content

How To Build Vertical Supports For Your Garden




I've gotten a late start on getting some of my veggies into the garden.  I've already planted potatoes, lettuce, sugar snap peas, and pepper plants.  All that's left is green beans, cucumbers, squash, and cantaloupe. 

I wanted to grow the green beans and cucumbers vertically, so that meant that Hubs and I needed to decide on how to do it - and do it on a budget.  Here's what we came up with:


First, we bought welded wire (we bought vinyl coated so it will last longer). It was $48.00 for the whole roll and we have some left over for another project. 



 Then we bought 12 ten foot lengths of electrical conduit tubing ($2.00 a piece).




Hubs, pounded them into the ground with a fence post pounder.  That was the most practical thing to use because he had to do it while standing on a ladder.  We set the ladder on pieces of 1x4 for stability and also to keep the garden soil from getting compacted.  Each pole was topped with a mini clay pot for cuteness (it's all about presentation, you know).



After each pole was in place, we cut a piece of wire fencing, 7 feet long and attached it to the poles by wrapping the ends around the pole.  The fencing bent easily and we secured each side with a few zip ties.


We built a total of 6 vertical supports.  I planted 2 with green beans and 2 with cucumbers.  The other 2 will be planted with more green beans in a few weeks to lengthen the harvest. 

Hopefully, even though I've gotten a late start, we'll be picking beans and cucs in a few months. 

Comments

  1. Love these supports! We've done a couple of different models of vertical supports over the last few years. These look sturdy and long lasting!

    ReplyDelete
  2. I love the tiny clay pots on the tops! Like what you have done!

    ReplyDelete

Post a Comment

I'd love to know what you're thinking. Please feel free to leave ideas and comments.

Popular posts from this blog

How To Make Your Own Exercise Bike For Next To Nothing

Remember back in April when I had a kidney transplant?  Well, the kidney is doing great (thanks, Cathy , for taking such good care of it when you owned it).  There was one little glitch, however.  During surgery, the retractors they used caused some nerve damage in my right leg.  When I woke up from surgery, I couldn't move or feel my leg.  The docs felt like the feeling would come back but the paralysis had them stumped.  A visit to a neurologist ruled out a stroke and a CT scan showed some fluid which was pressing on L4 and L5 (medical talk which means I couldn't feel or move part of my leg).  The prognosis is good and I'm recovering pretty quickly.  In fact, I've left my cane behind and I'm walking freestyle without falling.  My next goal is to be able to drive. I've been itching to get back to exercising (physical therapy doesn't count) because my medication causes me to gain weight and I need to burn some calories.  Running? - n...

A Designer's Secret For A Taller Bed

  Several years ago Hubs and I spent almost a year looking for a bedroom set that we both loved.  He wanted clean lines and dark wood.  I wanted curves and a "tall" bed.  Of course, there was no perfect bedroom set but we were able to compromise on a set that we both liked.  My main wish was for a bed that I could "climb up into".  The problem with that wish was that most of the "tall" beds were four poster beds and Hubs was not in the mood for that.  We found a Thomasville bed on display at a local furniture store and it fit the clean lines that Hubs wanted and it was "tall"  enough to suit me.  The problem was that once we received the bed we ordered in our home, it wasn't as tall as I had remembered it being.  My heart sunk!  I went back to the furniture store to look at the display.  Their bed was much taller than our bed.  Hmmm. . . what was different? I got nosey and lifted up the comforter on the ...

Plans For A DIY Exercise Bike Stand

  Thank you to so many of you who emailed me about plans for the DIY Exercise Bike Stand .  I apologize that it has taken me so long to get the measurements to you, but they are finally here!   The wood was purchased at Home Depot and the bike pegs were purchased at Walmart in the bike section.    The bike we used for this project is a 24" 12 speed bike (I'm a shorty).  I used the hardest gear while riding, but this set-up does not allow you to really get much resistance (for building muscle).  It was great for getting my legs moving after some nerve damage.  I also wanted to burn calories and get my heart rate up and this did the trick.    If you have any questions, just shoot me an email.