Skip to main content

Kitchen Remodel: Making Progress With The Floors and Cabinets

 
Well, the yellow pine floors finally made their appearance and they are perfect. 
 
They won't have a finish until everything else is done.
 


You can see the difference between the old floor in the utility room and new floor in the kitchen. 


The following day, the cabinet boxes went in.  We had a local guy build the custom cabinets.  It cost considerably less to have him build the cabinets than to buy them from a big box store.  Plus, they are custom!


The stove will go to the far right.  The fridge will go to the right of the window.  A farmhouse sink will go under the window with the dishwasher to the left. 

We have a nice glass-front upper cabinet ready to be installed to the left of the new window.  With additional trim, it will look like a small china cupboard.  Because of the extra trim it will be installed after the granite goes in. 


Rough cut wood is being picked up right now to be used as a faux beam over each of the windows and upper cabinets to match the beams in the rest of the house. 

A few hours after I took the pictures above, the cabinet guys came to install most of the drawers and doors and the hardware. 

  Here is the area where the stove will go.  I bought the drawer pulls from Target and the door handles at Home Depot. 



A few more hinges and pulls still need to be installed as well as the adjustable shelves.  All of the drawers have the soft close sliders which I'm excited about. 


I'm off now to purchase the lights we finally picked out and also some additional door pulls.  I can't believe I didn't count correctly!  Good grief.  We've decided to reuse our old ceiling fan so I'm just going to pick up a new light kit - I'm thinking schoolhouse light.  Of course, I'm going to spray paint the old fan to freshen it up. 

Comments

  1. Cabinet pulls and cabinets look great! OMG, the floor will be beautiful! Can't wait to see it finished!

    ReplyDelete
  2. it is looking I am sure you are excited to get in your new kit.

    ReplyDelete

Post a Comment

I'd love to know what you're thinking. Please feel free to leave ideas and comments.

Popular posts from this blog

How To Make Your Own Exercise Bike For Next To Nothing

Remember back in April when I had a kidney transplant?  Well, the kidney is doing great (thanks, Cathy , for taking such good care of it when you owned it).  There was one little glitch, however.  During surgery, the retractors they used caused some nerve damage in my right leg.  When I woke up from surgery, I couldn't move or feel my leg.  The docs felt like the feeling would come back but the paralysis had them stumped.  A visit to a neurologist ruled out a stroke and a CT scan showed some fluid which was pressing on L4 and L5 (medical talk which means I couldn't feel or move part of my leg).  The prognosis is good and I'm recovering pretty quickly.  In fact, I've left my cane behind and I'm walking freestyle without falling.  My next goal is to be able to drive. I've been itching to get back to exercising (physical therapy doesn't count) because my medication causes me to gain weight and I need to burn some calories.  Running? - n...

A Designer's Secret For A Taller Bed

  Several years ago Hubs and I spent almost a year looking for a bedroom set that we both loved.  He wanted clean lines and dark wood.  I wanted curves and a "tall" bed.  Of course, there was no perfect bedroom set but we were able to compromise on a set that we both liked.  My main wish was for a bed that I could "climb up into".  The problem with that wish was that most of the "tall" beds were four poster beds and Hubs was not in the mood for that.  We found a Thomasville bed on display at a local furniture store and it fit the clean lines that Hubs wanted and it was "tall"  enough to suit me.  The problem was that once we received the bed we ordered in our home, it wasn't as tall as I had remembered it being.  My heart sunk!  I went back to the furniture store to look at the display.  Their bed was much taller than our bed.  Hmmm. . . what was different? I got nosey and lifted up the comforter on the ...

Plans For A DIY Exercise Bike Stand

  Thank you to so many of you who emailed me about plans for the DIY Exercise Bike Stand .  I apologize that it has taken me so long to get the measurements to you, but they are finally here!   The wood was purchased at Home Depot and the bike pegs were purchased at Walmart in the bike section.    The bike we used for this project is a 24" 12 speed bike (I'm a shorty).  I used the hardest gear while riding, but this set-up does not allow you to really get much resistance (for building muscle).  It was great for getting my legs moving after some nerve damage.  I also wanted to burn calories and get my heart rate up and this did the trick.    If you have any questions, just shoot me an email.